欢迎到
autoqi Electronics Ltd.

免费会员
autoqi Electronics Ltd.
中国
首页
公司信息
产品目录 (32)
 
-  AK-500
-  CAS3/912X/9S12X IN CIRCUIT PROGRAMMER PROGRAMMER
-  Auto setup master
-  honda key programmer(fly100 Locksmith Version)
-  s610
-  T300 Key Programmer
-  FORD(FOCUS), MAZDA Keymaker
-  VAG CAN-BUS DIAGNOSTIC TOOL(HEX-CAN-USB V805.0)
-  BMW KEY PROGRAMMER
-  Mercedes Benz Key Programmer
-  Remote Master
-  Toyota Key Programmer
-  BMW GT-1
-  Honda GNA600
-  BMW Airbag Reset Tool
-  SDD Key Programming
-  VAGDash COM
-  VAGDASHCOM+CAN
-  Toyota Lexus Smart Keymaker by OBD
-  CAS3 PROGRAMMER
-  CAS3/912X/9S12X IN CIRCUIT PROGRAMMER PROGRAMMER
-  New Benz programme Machine
-  M35080
-  HITAG-2 Key Tool(last version v5.0)
-  SBB KEY PROGRAMMER
-  MB Key Prog(for smart key)
-  SuperVAG K+CAN
-  Mercedes-Benz KEY PROGRAMMMER
-  Multi Vehicle Programmer
-  Transponder Programmer
-  obd toyota key programmer
-  New U6
分享您的想法
  - 写回顾
- 推荐给你的朋友的贸易
联系我们
语言
 - English
-
 产品目录: HITAG-2 Key Tool(last version v5.0)
HITAG-2 Key Tool(last version v5.0)
(产品照片)
规格:With help of this tool you can program/generate key/transponders of Audi A8, VW Touareg, VW Phaeton, Bentley Continental, Porsche Cayenne, BMW E38, E39, E46, E53, E60, E61, E63, E64, E65, E66, E70, E87, E90, E91, E92. Supported immobilizers EWS2, EWS3, EWS3+, EWS4, CAS, CAS2, CAS3. Now you can read data stored inside of the key - identification number, ODOMETER! Added generation of keys by dump of kessy (Audi A8, VW Touareg, Bentley Continental, Porsche Cayenne). Works with latest 2008 models. Possibility to program "dealer keys"

For programming of Keys or Transponders of BMW cars you need to read eeprom dump from EWS or CAS and software automaticly prepare key/transponder ready to start car.
For programming of Keys or Transponders of Audi A8/VW Touareg/VW Phaeton/Porsche Cayenne/ Bently Continental you need to read eeprom from kessy (93c86 eeprom) and software automaticly prepare key/transponder ready to start car. This is for car up to 2007 year.
For programming of Keys or Transponders of Audi A8/VW Touareg/VW Phaeton/Porsche Cayenne/ Bently Continental you need to read eeprom from kessy (93c86 eeprom) or eeprom from Engine Control Unit and software automaticly prepare DEALER key/transponder ready to start car. This is for car 2007 and 2008 year.

example :- BMW E60 with CAS2.
First you must Read eeprom dump from CAS2 ( you can use any programmer )
1. If you use Transponder you must switch Operation mode in PASSWORD. If you use key you must switch Operation mode in Crypto.
2. Push button - Load immobilized dump and choose readed eeprom from CAS2.
3. Next step is to write what number of key you want to programm in CAS2 ( in this example is Key number 3) after push button Generate key and Hitag2 programmer programm Transponder ( or Key).
4. After finishing programming you see message : Programming done.
5. After successcull programming of transponder or key you must push button - Save immobilizer dump
6. Write new name of modify by software dump.
7. Save this new dump and programm in CAS2
Now you can start car with this transponder.

richelautokeycn@yahoo.com  
你的询问将被记录在"会员商业电邮"。

推荐给你的朋友的贸易

商户资料
   名字: richelyee女士 [销售]
   电子邮件: richelautokeycn@yahoo.com
   主页: http://www.cnautoqi.com   
   即時通訊
Windows Live: www.carkeybmwcn@hotmail.com www.carkeybmwcn@hotmail.com
Skype: cnautokey
   手机号码: +8613530312426
   电话号码: +86-755-89572302
   电传号码: +86-755-89572302
   城市: long shan naling 深圳 中国
深圳 518000, 广东
中国


要建立你自己的公司网站?
点击这里!